E 103 Extruder
103 mm Entek extrusion line
Download throughput rate sheet 
E-MAX™ twin-screw extruders are designed for maximum flexibility. Taking full advantage of co-rotating technology, ENTEKs screw geometry, metallurgy and manufacturing discipline allow for industry leading material mixing and productivity in multiple areas of processing. The base design, control modularity, multiple L/D choices, high torque/high speed motor and gearbox combinations, and material feed options can be modified to meet or exceed your requirements.
[ print ]
| Extruder Specification | |
|---|---|
| SCREWS | |
| Diameter | 103 mm |
| Rotation | Co-Rotating |
| Length | 28-52 L/D |
| Screw Center Distance (mm) | 84 |
| Screw Do/Di Ratio | 1.59 |
| Flight Depth (mm) | 19.0 |
| Free Area, 2-Flight (cm2) | 61.5 |
| Shafts | 24 Tooth Involute Spline |
| BARRELS | |
| Form | Square, Flanged |
| Length | 412 mm |
| Cooling | Internal Liquid Cooling |
| Open Barrel Heat Zone | 12.5 kW Aluminum 16.6 kW Bronze/Cast Iron |
| Closed Barrel Heat Zone | 15.5 kW Aluminum 23.6 kW Bronze/Cast Iron |
| DRIVE SYSTEM | |
| Std. Gearbox Ratios | 1.75 / 2.92 / 4.3 / 5.8 |
| Screw Speeds | 1000 / 600 / 400 / 300 rpm |
| Motor @ 1750 rpm | 2300 / 1400 / 950 / 700 hp |
| Motor Equivalent in Watts | 1715 / 1044 / 708 / 522 kW |
| Voltage Options | 380 / 415 / 460 / 575 Volt |
| Standard Motor Controller | AC |
| CONTROLS | |
| Controller | Ethernet PLC with Color Computer Interface |
| Heat/Cool Zones | Up to 16 Standard (additional upon request) |
| SIZE & UTILITIES | |
| Installed Cooling Capacity (gearbox and barrel) | 143 tons (1,810,100 kj) [528 kW] @ 1000 hp |
| Typical Cooling | 32 tons (405,056 kj) |
| Est. Power Requirements* | 1346A Power, Minimum Breaker 1800 Amps |
| Centerline Height | 1155 mm [45.5 in] |
| Length, 48D | 9308 mm [366 in] |
| Width | 1225 mm [48.5 in] |
| Height (top of motor) | 1675 mm [66 in] |
| Weight (approx.) | 15000 kg [33000 lb] |
| * - Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400hp and Up | |
|
Download throughput rate sheet |
|
